Search This Supplers Products:Refrigerated air dryerDesiccant air dryerWater chillerHeat recovery systemAdsorption air dryerAir filter
Hot Saling active alumina heated adsorption air dryer
- group name
- Desiccant air dryer
- Min Order
- 1 unit
- brand name
- SHANLI
- model
- SLAD-15MXF
- Nearest port for product export
- Ningbo, Shanghai, Guangzhou, Tianjin
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, Express Delivery
- Acceptable payment methods
- T/T, L/C, Cash
- update time
- Thu, 14 Nov 2024 14:46:38 GMT
Paramtents
Air inlet temp 20-45°C
Oil Content <=0.1PPM
Air consumption <=7%
Pressure dew point -40°C
Air inlet pressure 0.6~1.0MPa
Pressure loss ≤3% of inlet pressure
Place of origin Hangzhou, China
Certification CE CCC ISO9001
Power AC 380V-50HZ/ AC220V-50HZ
Warranty 1 year
Packging & Delivery
- 174cm x 73cm x 235cm
-
Min Order1 unit
Briefing
Detailed
Information
● Regenerative desiccant dryers use desiccant media to dry compressed air through the process of adsorption.
● Dry air with dew points of either -20°C, -30°C, or -40°C can be achieved.
● These extremely low dew points are necessary in critical compressed air applications or for those in extremely cold environments
● In such environments, any moisture remaining in the air would freeze inside compressed air system piping, resulting in blocked flow.
Technical Specifications
● Max air inlet temp.: 45 Deg C
● Max air inlet pressure.:0.6-1.0 Mpa
● Air consumption: <=7% of inlet air
● Pressure loss; <=3% of inlet pressure
● Oil content: <=0.1PPM
● Pressure dew point: -40 Deg C (standard type)
● Control method: PLC control
● Power: AC 380V/220V-50HZ
● Cycling time: T=2 h
Working Principle
● During dryer operation, the desiccant media is used to dry the air followed by a period of regeneration when the media is purged of the moisture it collects so it can be used again for drying.
● Twin-tower design of our dryers allows simultaneous air drying and desiccant regeneration-without interruption of compressed air flow.
Note:
| 1. Gas inlet valve | 2. Gas drain valve | 3. Silencer |
|---|---|---|
| 4. Regenerative one-way valve | 3. Gas outlet one-way valve | A.B. Adsorptive tower |
Performance Parameters
| Heated Regeneration Adsorption Air Dryer | ||||||||
|---|---|---|---|---|---|---|---|---|
| Model | Air Capacity | Desiccant Weight (Kg) | Air Pipe Diameter | Net Weight (Kg) | Length (mm) | Width (mm) | Height (mm) | |
| (Nm3/min) | cfm | |||||||
| SLAD-1MXF | 1.2 | 42 | 24 | G1" | 186 | 812 | 620 | 1417 |
| SLAD-2MXF | 2.5 | 88 | 40 | G1" | 256 | 732 | 586 | 2017 |
| SLAD-3MXF | 3.6 | 127 | 60 | G1" | 341 | 962 | 638 | 1711 |
| SLAD-4.5MXF | 4.8 | 169 | 85 | G1 1/2" | 447 | 842 | 642 | 2225 |
| SLAD-6MXF | 6.8 | 240 | 120 | G1 1/2" | 630 | 950 | 642 | 2105 |
| SLAD-8MXF | 8.5 | 300 | 158 | G2" | 678 | 1288 | 696 | 2231 |
| SLAD-10MXF | 10.9 | 384 | 190 | G2" | 810 | 1288 | 696 | 2331 |
| SLAD-12MXF | 12.8 | 451 | 190 | G2" | 810 | 1288 | 696 | 2331 |
| SLAD-15MXF | 16 | 564 | 310 | DN65 | 983 | 1743 | 735 | 2356 |
| SLAD-20MXF | 22 | 775 | 492 | DN65 | 1271 | 1933 | 736 | 2415 |
| SLAD-25MXF | 26.8 | 945 | 578 | DN80 | 1371 | 1903 | 823 | 2738 |
| SLAD-30MXF | 32 | 1128 | 600 | DN80 | 1550 | 2101 | 913 | 2462 |
| SLAD-40MXF | 43.5 | 1533 | 856 | DN100 | 1994 | 2200 | 1002 | 2576 |
| SLAD-50MXF | 53 | 1868 | 1002 | DN100 | 2127 | 2213 | 1002 | 2594 |
| SLAD-60MXF | 67 | 2361 | 1718 | DN125 | 3243 | 2716 | 1270 | 2857 |
| SLAD-80MXF | 90 | 3172 | 2300 | DN125 | 3698 | 2816 | 1453 | 2911 |
| SLAD-100MXF | 110 | 3877 | 2800 | DN150 | 4677 | 3312 | 1751 | 3094 |
| SLAD-120MXF | 130 | 4582 | 3370 | DN150 | 5140 | 3420 | 1900 | 3159 |
| SLAD-150MXF | 160 | 5639 | 4070 | DN200 | 6126 | 3812 | 1900 | 3378 |
| SLAD-200MXF | 210 | 7402 | 5530 | DN200 | 8370 | 4224 | 2235 | 3534 |
| SLAD-250MXF | 260 | 9164 | 6116 | DN250 | 13100 | 4616 | 2647 | 3805 |
| SLAD-300MXF | 310 | 10926 | 7016 | DN250 | 15000 | 4816 | 2802 | 3883 |
Package and Shipment
● Packing details: Wooden crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary desiccant air dryer)
● Transportations: sea transport, rail transport, air transport, road transport, LCL/ FCL container transport or as requested
● Trade terms: FOB, CFR, CIF and EXW, DDP, etc.
● Delivery time: in 20 days after receiving deposit (customized machines not included)
Company Information
● Hangzhou Shanli Purify Equipment Corp., was formed in 1997, as a compressed air solutions company.
● The workshop at integrated engineers and contractors has a dedicated team, which is continuously engaged in upbringing of new technologies for greater efficiency.
● The company was involved in supplying of refrigerated air dryers, desiccant air dryers, compressed air filters, oil water separators and water chillers as a manufacturer, exporter and supplier.
Advantage
1. Quality:
● Certification: CE, ISO-9001, ISO-14001 and 26 patents to ensure unmatched quality of our product assortment.
● Stringent quality control mechanism: updating the involved technology as per prevailing international standards;
● Stable performance: using premium grade raw material from highly reputed manufacturers, like Danfoss, Emerson, Performer, Bitzer, Fusheng, Sprolan;
2. Customer:
● Some of major cooperated customers (from our wide range of customers ) have been enlisted below for reference:
| S.NO. | VALUED CUSTOMERS | S.NO. | VALUED CUSTOMERS | S.NO. | VALUED CUSTOMERS |
|---|---|---|---|---|---|
| 1 | Atlas Copco | 2 | BOGE Kompressoren | 3 | Ingersoll Rand |
| 4 | CompAir Air Compressors | 5 | Sinopec Group | 6 | Sullair Asia |
3. Scale:
● Shanli has become one of largest manufacturers in purifying industry of China with annual sales turnover USD 22 million.
● Shanli has a wide range of customers who have full faith in our service delivery, warranty, quality and workmanship.
Contacts
Hangzhou Shanli
Add: No.8,Liangzhan Road, Renhe Street,Hangzhou, 311107, China
Tel:86-571-86392999
Fax:86-571-86392998
Email:jovelyzou..........com
website: ..........com