Telecomm industry (pressurizes its underground cables to repel moisture and avoid shorts)PaintingPneumatic toolsTextile manufacturingPneumatic control systemsFeed air for zeolite type oxygen and nitrogen generatorsDental office airTruck and train air brake systems.Submarine ballast tank blow systems (implemented on American submarines after USS Thresher (SSN-593) disaster)

Our company has electronic drainage and zero gas consumption drainage to choose.

Danfoss,Sporlan.

A desiccant compressed air dryer uses a special material, called desiccant to dry the compressed air. This desiccant is made of a material that really ‘likes’ water, the water sticks to the surface of the desiccant. Every once in a while, the desiccant needs to be dried, or ‘regenerated’, to remove the water again.A desiccant dryer usually has two identical towers, filled with desiccant. One tower...

Normally compressed air water vapor content is determined by the temperature of the compressed air; keeping the pressure of compressed air in the case of unchanged, it can reduce the compressed air in the water vapor content which reducing the temperature of the compressed air, and the excess water vapor condenses into a liquid. The freeze dryer for drying compressed air refrigeration technology i...

What basic information do we need when you send us inquiry?For refrigerated air dryer:We need to know the power supply, inlet air temperature, ambient temperature, PDP requirement and working pressure .For desiccant air dryer:We need to know the power supply, PDP requirement and working pressure .

A: Refrigerated dryerThe refrigerated dryer uses the cooling air to precipitate the moisture of the moist air from the air after condensation and obtain the drier air.working principleThe humid and high temperature of the compressed air into the front cooler (high temperature type) heat dissipation into the heat exchange and discharged from the evaporator cool air for heat exchange, so that the co...

Know the Temperatures Should know the inlet air temperature.Should know the inlet Ambient temperature.Know the Actual using conditionThe working pressureThe power supplyThe using countryKnow Each UseThere are many other uses requiring moisture removal to a low dew point. For example, railroad tank cars, which carry liquid chlorine, are padded (charged) with compressed air to enable pneumatic unloa...

Every facility has differing application needs and usage demands, but selecting the right compressed air dryer for the situation will have a significant impact on energy savings and efficiencies.Compressed air systems account for a significant portion of a facility’s overall operating costs. Choosing the right type of compressed air dryer for the application, and making sure that dryer is using en...

Drying machine under normal conditions, the evaporator surface layer of film-like condensation exists, if the evaporator temperature drops very low, so that the heat transfer brass surface temperature below zero, the water vapor will condense into a copper tube surface frost, with The problems arising from the sublimation of water vapor to frost than condensing to the dew to absorb about 15% more ...

Shanli attends two exhibitions this year.1.PCVExpo in 24-26 October in Moscow.2. Manufacturing Indonesia in 6 -9 December 2017 in Jakarta. Our booth is D-994.

Warantee time will be 18 months since delivery date or 12 months after debugging.25 days installation and debugging oversea for free ,but meals,lodging and transportation cost all-inclusive burden by buyer .If seller engineers need to stay in buyers over 25 days, then buyer should pay to engineers extra $150 per day per person.

The difference between the working principle No heat absorption dryer is based on the principle of pressure swing adsorption, regeneration cycle, the use of self-heating (no external heat source) for adsorption and drying. (After the regeneration group is expanded and decompressed to atmospheric pressure, the dry compressed air is purged from the top to the bottom, the moisture in the adsorbent is...

Compressed air can be pressurized, cooling, adsorption and other methods to remove the water vapor which can be heated, filtered, mechanical separation and other methods to remove liquid water. One of the refrigeration dryer is to reduce the compressed air to exclude the water vapor contained therein, while the adsorption dryer by adsorption to remove water vapor in the compressed air, so as to ob...

1, the site conditions: ambient temperature, air compressor type, system configuration;2, import conditions: pressure, temperature, flow;3, export conditions: dew point, pressure loss, effective gas supply;4, adsorbent: molecular sieve (alumina);5, regeneration mode: no thermal regeneration, micro-thermal regeneration;6, renewable gas consumption: energy consumption and so on.

The use of adsorption on the surface of the adsorption (activated carbon) filter, there is the use of a limited period, the adsorbent oil adsorption capacity will also reduce its problems. Absorbent filters, such as wool, linoleum, and cotton, are the main materials used for absorbent filters, losing their structural advantage and rapidly losing their ability to absorb liquids and impregnate them....

The corresponding relationship between the "pressure dew point" and the atmospheric pressure dew point is related to the "compression ratio" and is usually expressed graphically. In the same "pressure dew point" case, the "compression" ratio is larger, the lower the corresponding atmospheric pressure dew point.

The lower the temperature of the gas stream, the higher the drying efficiency of the adsorption dryer. Because the lower the air temperature, the less water is contained, the lower the dry load of the adsorption dryer, the stronger the drying capacity of the adsorption dryer, so the higher the efficiency.

The lower the temperature of the gas stream, the higher the drying efficiency of the adsorption dryer. Because the lower the air temperature, the less water is contained, the lower the dry load of the adsorption dryer, the stronger the drying capacity of the adsorption dryer, so the higher the efficiency.

What are the desiccants of the adsorption dryer?Adsorption dryer generally use silica gel, activated alumina, molecular sieve as a desiccant.What are the characteristics of various desiccants?Silicone is more susceptible to moisture deliquescence.Activated alumina adsorption performance is very strong, very stable, encountered moisture is not deliquescence, and has high crushing strength and abras...

The adsorbent is used to dehydrate and dry the water vapor in the compressed air.

Deposits of sludge formed by dirty, wet and oily airact as a drag on pneumatic cylinders so that the sealsand bearings need frequent maintenance. Operationis slowed down and eventually stopped. Moisturedilutes the oil required for the head and rod of an aircylinder, corrodes the walls and slows response. Thisresults in loss of efficiency and production.Moisture flowing to rubber diaphragms in valv...

All atmospheric air contains some water vaporwhich will begin to condense into liquid water inthe compressed air or gas system when the air orgas cools past the saturation point, i.e., the pointwhere it can hold no more water vapor.*The temperature at which this happens is knownas the dew point.** This dew point becomesall-important in determining how much dryingis needed.Condensation in the comp...

Main features for Shanli High Temp Refrigerated Dryer:1.Pressure：0.6-1.6MPa2.Max air inlet temp: 80 C3.Max ambient temp:50 C4.Dew Point:2-10 C5.Compressor:Hitachi,Panasonic or Bitzer6.Refrigerant:R134a/R407C7. Heat Exchanger:Three-in-one design: Heat exchanger, Evaporator and Gas-liquid Separator be combined together.8. Standard configuration of real time display the dew point.9. Standard configur...

General Data: Air inlet pressure:0.6-1.0MPa Max air inlet pressure:1.0MPa Air inlet temp:25-45 C Max air inlet temp:45C Ambient temp:5-38 C Max ambient temp:38 C 1.Heat exchanger,Evaporator and Gas-liquid Separator be separated together 2.Pressure dew point of 7 C in rated condition(7bar/Inlet temp 38C/Ambient temp 38C) 3.Higher compressor power mean more power consumption. 4.Higher evaporator loa...

Advantages: General Data: General Data: Air inlet pressure:0.6-1.6MPa Max air inlet pressure:1.6MPa Air inlet temp:25-60 C Max air inlet temp:60C Ambient temp:5-50 C Max ambient temp:50 C 1 Th i d i Ht h E t d1.Three-in-one design:Heat exchanger,Evaporator and Gas-liquid Separator be combined together 2.Low Dew Point:Stable pressure dew point of 3 C in rated condition(7bar/Inlet temp 38C/Ambient t...

Q:Is Shanli an manufacturer?A:Yes,Shanli is the biggest air dryer manufacturer with 20 year histroy.Q:Is Shanli a famous brand in China?A:Yes,Shanli is the leading brand in China with No 1 market share.Q:How many staff in your factory?A:Over 300 professional staff.Q:How many square meters of your factory?A:30,000 square meters which is the biggest among the air dryer industry.Q:What about your cus...

Technical ParametersAir Handling Capacity:30-18000 m3/h/0.5-300m3/minPressure range: 0.6-1.6 MPa Inlet temp range: 15-60CAmbient temp range: 5-50CCooling Type: air-cooled typePower: 220V/380V/50Hz or 60HzRefrigerant: R22/R134a /R407C *Rated condition:Pressure 0.7MPa,Inlet temperature 38CAmbient temperature 38CPDP 2-10COEM and ODM service is available.Compressor:Hitachi or BitzerHot gas by pass val...

Technical Specification:Air Capacity:30-18000 m3/h/0.5-300m3/min Pressure: 0.6-1.6 MPa Inlet temperature: 15-60CAmbient temp: 5-50CCooling Type: air-cooled typePower: 220V/380V/50Hz or 60HzRefrigerant: R22/R134a /R407C *Rated condition:Air inlet pressure 0.7MPa,Air Inlet temp 38CAmbient temp 38CPDP 2-10COEM and ODM service is available.Compressor:Hitachi or BitzerHot gas by pass valve:DanfossAutom...

Technical Specification:Air Capacity:30-18000 m3/h/0.5-300m3/min Pressure: 0.6-1.6 MPa Inlet temperature: 15-60CAmbient temp: 5-50CCooling Type: air-cooled typePower: 220V/380V/50Hz or 60HzRefrigerant: R22/R134a /R407C *Rated condition:Air inlet pressure 0.7MPa,Air Inlet temp 38CAmbient temp 38CPDP 2-10COEM and ODM service is available.Compressor:Hitachi or BitzerHot gas by pass valve:DanfossAutom...

General Specification:Air Capacity:17-10594 cfm/0.5-300m3/min Working pressure: 0.6-1.6 MPa Air Inlet temperature: 15-60CAmbient temperature: 5-50CCooling Method: air-cooledPower: 220V/380V/50Hz or 60HzRefrigerant: R134a /R407C /R404A*Rated condition:inlet pressure 0.7MPa,Inlet temp 38CAmbient temperature 38CPDP 2-10COEM and ODM service is available.Compressor:Hitachi or BitzerHot gas by pass valv...

Technical DataCapacity:0.5-300m3/min Max working pressure:1.6 MPa Max.inlet temperature: 60 CMax.Ambient temperature: 50 CMin.ambient temperature: 5 CCooling type: air-cooledPower supply: 220V/380V/50Hz or 60HzRefrigerant: R134a /R407C /R410A*Rated condition:Working pressure 0.7MPa,Inlet temperature 38CAmbient temperature 38CPDP 2-10COEM and ODM service is available.Compressor:Hitachi or BitzerHot...

More and more customers forward new demand for air dryers as below :1: need friendly refrigerant 2: save energy 3:more compact To meet customer new requirement , Shanli has developed new air dryers as below with friendly refrigerant and more compact structure. New refrigerated air dryer for air compressorNew desiccant air dryer for air compressor

More and more countries want to protect environment , so more and more customers need use friendly refrigerant used for air dryers , like R134A, R407C and so on . Shanli will replace all refrigerated air dryers with friendly refrigerant within 2017 .

Shanli HighlightI．Strong corporate strength★ Established in1997, an area of 30,000 M2, more than 300 employees★ Market share: No.1 in China★ 2016 annual sales: 28 million US dollars★ Certificate CE, production license Technical ForceTechnical research and development capabilities: 35 R & D personnel, including five senior engineers, 12 engineers, 18 assistant engineers. (Innovation) Award Fun...

• Elements are assembled by the help of a tie rod system;• Two external float drains for excellent drainage;• Unique design for pre-separation zone;• Strong welded design;• CE and ASME tanks available;• Design forasey elemtn change from top flange.

• High efficiency, energy saving and noise reduction elements are standard aspects in development and production. • The main product line reaches the standard of national Class 2 high efficiency requirements. • Heat recovery systems, permanent magnet motor technology are available to provide an even higher efficiency of the compressors. • We combine the advanced German technologies with the latest...

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system.So behind the gas equipment is used to the our refrigerated air dryer.

1. The interface, the unique inclined plane design with simple man-machine, the easily style gate lock, is convenient and rapid.2. Classic, neat and compact structure design.Science and technology aesthetics-specialization.3. Pre-cooler of copper gas-gas, the evaporator of copper, more sufficient for exchanging heat.4. The supper-volume of whirlwind separator can remove water at all.5. The best pa...

1:Reliable quality of Germany original air end 2:Approved with CE,ISO certification3:Excellent after-sale service4:More competitive price with higher quality 5:Prompt delivery and good package6:Years' export experience