Search This Supplers Products:Refrigerated air dryerDesiccant air dryerWater chillerHeat recovery systemAdsorption air dryerAir filter
Shanli SDXG-80I blower heat regenerative desiccant adsorption air dryer
- group name
- Desiccant air dryer
- Min Order
- 1 unit
- brand name
- SHANLI
- model
- SDXG-80I
- Nearest port for product export
- Ningbo, Shanghai, Guangzhou, Tianjin
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, Express Delivery
- Acceptable payment methods
- T/T, L/C, Cash
- update time
- Thu, 21 Nov 2024 21:01:51 GMT
Paramtents
Air inlet temperature 5-45°C
Air inlet prseeure 0.6-1.0MPa
Air consumption 0
Pressure dew point -40°C (standard type)
Inlet oil content <=0.1PPM
Pressure loss ≤3% of inlet pressure
Place of origin Hangzhou, China
Certification CE CCC ISO9001
Power PLC control
Color Depend on your requirement
Packging & Delivery
- 345cm x200cm x310cm
-
Min Order1 unit
Briefing
Detailed
Features
●High efficient and energy saving;
●Lower dew point;
●Less gas consumption;
●Less pressure loss;
●Quality switch valves with high stable and reliable;
●Special air diffusion & automatic regeneration to extend desiccant life time;
●Highly reliable programmable logic control (PLC);
●Three-stage drainage features.
Working Principle
For added energy savings, it uses a high efficiency blower to take in ambient air required during the heat regeneration cycle to desorb moisture from the desiccant, no compressed air is used during this phase.
Dry compressed air is used during the dry air cooling regeneration period for reduced heat and dew point spike at tower switchover. This amounts to an average process air use of 3% of the rated capacity of the dryer.
| Technical Specification of Zero Purge Consumption Type | |||||||||
| Model | Air Capacity | Connection Diameter | Heater Power | Blower Power | Blower Fan | Desiccant Weight | Equipment Weight | Device Size | |
| (Mm3/min) | cfm | （KW） | （KW） | (Nm/min) | (kg) | (kg) | （mm） | ||
| SDXG-10I | 10.9 | 384 | DN50 | 8 | 1.3 | 2.4 | 311 | 1300 | 1850×950×2400 |
| SDXG-15I | 16 | 564 | DN65 | 10 | 1.3 | 2.4 | 486 | 1550 | 1950×1000×2440 |
| SDXG-20I | 22 | 775 | DN65 | 12 | 1.75 | 3.6 | 606 | 2000 | 2110×1100×2470 |
| SDXG-25I | 26.8 | 945 | DN80 | 15 | 1.75 | 3.6 | 716 | 2200 | 2200×1200×2510 |
| SDXG-30I | 32 | 1128 | DN80 | 18 | 2.2 | 5.2 | 860 | 2350 | 2200×1300×2510 |
| SDXG-40I | 43.5 | 1533 | DN100 | 22 | 2.2 | 5.2 | 1158 | 2900 | 2400×1500×2520 |
| SDXG-50I | 53 | 1868 | DN100 | 27 | 5.5 | 7.8 | 1520 | 3450 | 2750×1550×2850 |
| SDXG-60I | 67 | 2361 | DN125 | 36 | 5.5 | 9.2 | 1710 | 3900 | 2750×1650×2850 |
| SDXG-80I | 90 | 3172 | DN125 | 42 | 7.5 | 9 | 2436 | 5400 | 2724×2146×2940 |
| SDXG-100I | 110 | 3877 | DN150 | 54 | 13 | 14.2 | 3220 | 6000 | 3600×2150×3200 |
| SDXG-120I | 130 | 4582 | DN150 | 72 | 13 | 14.2 | 3842 | 6900 | 3900×2250×3400 |
| SDXG-150I | 160 | 5639 | DN200 | 84 | 13 | 19 | 5288 | 9500 | 4300×2400×3500 |
| SDXG-200I | 210 | 7402 | DN200 | 96 | 20 | 32 | 7008 | 14500 | 4800×2600×3850 |
| ...... | |||||||||
1. The gross (i.e. the weight of the product and packaging - that is, the total weight), tare (i.e. the weight of the packaging without any contents) and net (i.e. the weight of the product only) weights of the carg;
2. The nature, quality and specifications of the product being shipped;
3. The type of package (such as pallet, box, crate, drum, carton, etc.);
4. The measurements/dimensions of each package;
5. The number of pallets/boxes/crates/drums, etc.;
6. The contents of each pallet or box (or other container).
