Search This Supplers Products:Refrigerated air dryerDesiccant air dryerWater chillerHeat recovery systemAdsorption air dryerAir filter
China best high-selection blower heated desiccant air dryer
- group name
- Desiccant air dryer
- Min Order
- 1 unit
- brand name
- SHANLI
- model
- SDXG-120I
- Nearest port for product export
- Ningbo, Shanghai, Guangzhou, Tianjin
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, Express Delivery
- Acceptable payment methods
- T/T, L/C, Cash
- update time
- Fri, 15 Nov 2024 09:42:19 GMT
Paramtents
Air inlet temperature 5-45°C
Air inlet prseeure 0.6-1.0MPa
Air consumption 0
Pressure dew point -40°C (standard type)
Inlet oil content <=0.1PPM
Pressure loss ≤3% of inlet pressure
Place of origin Hangzhou, China
Certification CE CCC ISO9001
Power PLC control
Color Depend on your requirement
Packging & Delivery
- 390cm x 225cm x 340cm
-
Min Order1 unit
Briefing
Detailed
Product name: Blower heated desiccant air dryer
Product model: SDXG-120I
Product info
Regenerative desiccant dryers use desiccant media to dry compressed air through the process of adsorption. Dry air with dew points of either -20°C, -30°C, or -40°C can be achieved. These extremely low dew points are necessary in critical compressed air applications or for those in extremely cold environments where any moisture remaining in the air would freeze inside compressed air system piping, resulting in blocked flow.
Customer benefits
●High efficient and energy saving;
●Lower dew point;
●Less gas consumption;
●Less pressure loss;
●Quality switch valves with high stable and reliable;
●Special air diffusion & automatic regeneration to extend desiccant life time;
●Highly reliable programmable logic control (PLC);
●Three-stage drainage features.
Working Principle of regenerative air dryer
During dryer operation, the desiccant media is used to dry the air followed by a period of regeneration when the media is purged of the moisture it collects so it can be used again for drying. Twin-tower design of our dryers allows simultaneous air drying and desiccant regeneration - without interruption of compressed air flow.
Note:
| 1. Gas inlet valve | 2. Gas drain valve | 3. Silencer |
|---|---|---|
| 4. Regenerative one-way valve | 3. Gas outlet one-way valve | A.B. Adsorptive tower |
Model Specification and Performance Parameter
| Technical Specification of Zero Purge Consumption Type | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Air Capacity | Connection Diameter | Heater Power | Blower Power | Blower Fan | Desiccant Weight | Equipment Weight | Device Size | |
| (Mm3/min) | cfm | （KW） | （KW） | (Nm/min) | (kg) | (kg) | （mm） | ||
| SDXG-10I | 10.9 | 384 | DN50 | 8 | 1.3 | 2.4 | 311 | 1300 | 1850×950×2400 |
| SDXG-15I | 16 | 564 | DN65 | 10 | 1.3 | 2.4 | 486 | 1550 | 1950×1000×2440 |
| SDXG-20I | 22 | 775 | DN65 | 12 | 1.75 | 3.6 | 606 | 2000 | 2110×1100×2470 |
| SDXG-25I | 26.8 | 945 | DN80 | 15 | 1.75 | 3.6 | 716 | 2200 | 2200×1200×2510 |
| SDXG-30I | 32 | 1128 | DN80 | 18 | 2.2 | 5.2 | 860 | 2350 | 2200×1300×2510 |
| SDXG-40I | 43.5 | 1533 | DN100 | 22 | 2.2 | 5.2 | 1158 | 2900 | 2400×1500×2520 |
| SDXG-50I | 53 | 1868 | DN100 | 27 | 5.5 | 7.8 | 1520 | 3450 | 2750×1550×2850 |
| SDXG-60I | 67 | 2361 | DN125 | 36 | 5.5 | 9.2 | 1710 | 3900 | 2750×1650×2850 |
| SDXG-80I | 90 | 3172 | DN125 | 42 | 7.5 | 9.6 | 2660 | 5500 | 3450×2000×3100 |
| SDXG-100I | 110 | 3877 | DN150 | 54 | 13 | 14.2 | 3220 | 6000 | 3600×2150×3200 |
| SDXG-120I | 130 | 4582 | DN150 | 72 | 13 | 14.2 | 3476 | 8100 | 2998×2363×3140 |
| SDXG-150I | 160 | 5639 | DN200 | 84 | 13 | 19 | 5288 | 9500 | 4300×2400×3500 |
| SDXG-200I | 210 | 7402 | DN200 | 96 | 20 | 32 | 7008 | 14500 | 4800×2600×3850 |
Package and Shipment
• PackingDetails: Wooden crate pallet plus foam board and bubble film, Full closedwooden case. 1pcs/each package (for stationary screw air compressor)
• Shippingmethod: by sea, by LCL/FCL or as requested
• Deliverymethod: FOB, CFR, CIF and EXW, etc.
• Deliverytime: in 30 days after receiving deposit (customized machines not included)
Company and factory information
Hangzhou Shanli Purify Equipment Corp., was formed in 1997, as a Compressed Air Solutions Company. The company was involved in supplying of refrigerated air dryers,regenerative air dryers, compressed air filters, oil water separators and water chillers as a manufacturer, exporter and supplier. In a very short span of time, the company has emerged as one of the leading manufacturer, exporter, supplier, trader, distributor and service providers of Air Dryers, Filters and Pneumatic applications. The company benefits from the highly trained technical staff, which provides consultancy to various industries in improving the efficiency of their Pneumatic Systems.The workshop at Integrated Engineers and Contractors has a dedicated team, which is continuously engaged in upbringing of new technologies for greater efficiency. The company has a wide range of customers who have full faith in their service delivery,warranty, quality and workmanship.
Advantage
1. Quality:
Our quality conscious approach constantly motivates us to maintain superior industrial and international standards in our overall business activity. We have implemented a stringent quality control mechanism to ensure unmatched quality of our product assortment. We make use of premium grade raw material that are sourced from only highly reputed manufacturers/vendors. We have also appointed an expert team of quality controllers, who inspect the complete process work at every step of product development till final packaging & delivery of our products.
Our entire range is thoroughly tested in our modern quality testing laboratory. The lab is well equipped with latest testing instruments and equipment that enable us to carry out performance and allied tests. Further, to ascertain maximum satisfaction of our clients, we also give the privilege to test the products in their presence.
Our team of quality monitoring professionals undertake various steps at different stages ensuring that the end products offered meet desirable performance & durability standards. Inspected and certified by the various inspection agencies, the quality control measures undertaken also assure us that the components & parts manufactured meet the laid down specifications and standards. Further, we also keep on updating the involved technology as per prevailing international standards, which ensures production of highly performance oriented equipment that provide complete value for client's money.
2. Our suppliers list:
Some of the major suppliers (from our wide range of suppliers ) have been enlisted below for reference:
| S.NO. | VALUED SUPPLIERS |
|---|---|
| 1 | Sullair Asia |
| 2 | Sinopec Group |
| 3 | Atlas Copco |
| 4 | BYD Global |
| 5 | CompAir Air Compressors |
| 6 | BOGE Kompressoren |
3. SHANLI certification:
Product applications
SHANLI air dryers are used for both Industrial Applications and Residential/Home Applications. Although main and widely usage of air dryers are being found in industrial applications in many industries, there are still some areas and applications in non-commercial zone where air dryers are used.
Contacts
Hangzhou ShanliPurify Equipment Corp.
Add: No.8,Liangzhan Road, Renhe Street,Hangzhou, 311107, China
Tel:86-571-86392999
Fax:86-571-86392998
Email : jovelyzou..........com